www.36500365.com:主页 > 技术资料 >


作者:www.36500365.com 日期:2019-03-04 来源:橡胶接头厂家
How to select rubber joint in practice?
The first thing to think about is the place where the rubber joint is used, according to the medium and temperature, generally divided into: high temperature rubber joint, oil resistance rubber joint, acid and alkaline rubber joint, wear resistance rubber joint.It is not mainly based on the size of the size, the size of the appropriate step in order to successfully install.The nominal diameter DN of the same rubber joint is 32mm-3000mm, and the length is l90mm-500mm, which will be different according to the actual application.Then we should know the working pressure of rubber joints, which are widely used: 1.0mpa, 1.6mpa, 2.0mpa.
The larger the number, the greater the work pressure, i.e. the internal and external pressure that can be borne.Assuming that the material in the actual work is easy to show the appearance of pipeline pressure suddenly increased, we should choose a higher pressure level than the standard pressure at the moment of selection to solve the appearance of this material.


  • 单球体橡胶接头

  • 双球体橡胶接头

  • 同心异径橡胶接头

  • 偏心异径橡胶接头

  • 卡箍橡胶接头

  • 螺纹丝扣橡胶接头

  • 90度橡胶弯头

  • 菱形法兰橡胶接头

  • 橡胶鸭嘴止回阀

  • ?